Embedded Files
Tag lines are used
• At least one tag line on each load, ideally toward the load end(s) (“”lateral extremes””)
• Tag line anchored in a manner that it will control the load
• Tag line should NOT be attached to the rigging
Tag line
i. A tag line(s) shall be attached to all loads.
ii. The use of more than one tag line is permitted so long as it does not interfere with the safety of the operation.
iii. Tag-lines shall be the appropriate length to provide adequate control of the load.
iv. Tag-lines shall be adequately secured to the load.
v. Tag-lines shall be secured in a manner as not to upset the load’s center of gravity when the tag-line is pulled on.
vi. Tag-lines shall be free of knots and similar obstructions that could cause the tag line to get caught on another object.
vii. Tag-lines shall not be utilized to “anchor” the load.
Page updated
Google Sites
Report abuse